Field manual · TV

TCL QM7 QD-Mini LED Google TV (QM751G, 2024): quick sheet

Covers: TCL QM7 (2024) Google TVs: 55QM751G, 65QM751G, 75QM751G, 85QM751G, 98QM751G. Replaced by the QM7K (2025); check the model letter before ordering boards.

Cross-checkedBrands: TCL3 components

Mid-range mini-LED with a 120 Hz panel that accepts up to 144 Hz VRR, Google TV, Dolby Vision and HDR10+. Up to 1,500+ dimming zones depending on size (RTINGS counted 1,248 on the unit it tested). Mini-LED repair blocks: power board, LED driver, mini-LED backlight boards, main board.

Safety first

  • Unplug and wait before opening.
  • Two-person handling for 65 in and up; the 98 in needs a team and proper lifting.
  • Live tests on power board or LED driver are caution work.

How it works

Power board feeds the main board (Google TV, HDMI) and the LED driver; the main board sends zone dimming data to the backlight.

Mini-LED zones sit behind the diffuser; a dead zone shows as a dark block on a white field, and blooming around bright objects is normal behavior, not a fault.

144 Hz is a VRR ceiling for PCs/consoles, not the panel's fixed refresh rate.

Components & tests

Unlock all 3 components, specs, service mode and teardown

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

Get lifetime access

Official manufacturer documentation

Always confirm values against the tech sheet for the exact model.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work. © 2026 OnCall Tech. Original content; not a reproduction of any manufacturer document.Generic part photos (not of this brand): LCD TV with the panel removed, showing the grid of lit LED backlights by RobertKuhlmann, CC BY-SA 3.0

Diagnostic guides for this appliance

Guide · TV

TVs: standby LED blink patterns, why they are model-specific, and how to use them

Some makers use the standby LED as a self-diagnosis output. Sony, for example, repeats a group of blinks with a pause, and the count names a fault area. The meaning of a count depends on the maker and the chassis, so one model's table does not apply to another. Samsung's support simply says that if the red light still blinks after a power cycle on a known-good outlet, the set needs service. Use the blink only to separate power-delivery problems from internal faults and to point to a board.

6 steps ~20 minmoderate
Guide · TV

TV antenna finds no channels (or loses channels after a scan)

Most antenna problems are setup and signal, not a bad tuner: wrong input or scan type, a loose or damaged coax, an unpowered amplifier, an antenna in a poor spot, a splitter that cuts the signal, or a signal so strong it overloads the tuner. Stations also move or change format, so a rescan is the first step any time channels disappear.

6 steps ~30 mineasy
Guide · TV

TV talks: a voice reads every menu or describes the show

This is an accessibility feature that was switched on, often by accident through a remote shortcut (holding Mute or Volume, or pressing Star several times). A voice reading menus is the screen reader (Voice Guide, Audio Guidance, Screen reader). A voice describing the show is audio description, which may be a TV setting or the streaming app's audio track. Nothing is broken.

5 steps ~10 mineasy

Other tvs manuals

TCL QM7 QD-Mini LED Google TV (QM751G, 2024): quick sheet · OnCall Tech