Field manual · TV

LG UHD UT7000 (2024, webOS 24): quick sheet

Covers: LG UT7000 series 4K UHD LED TVs from 2024, for example 43UT7000PUA. Other sizes share the platform; confirm on the rating label.

Cross-checkedBrands: LG3 components

LG's entry 4K edge/direct LED set: 60 Hz native panel, webOS 24, alpha 5 Gen7 processor, three HDMI inputs with eARC on HDMI 2. Typical calls are software/network issues and, with age, LED backlight strips (sound but no picture).

Safety first

  • Unplug and wait before opening.
  • Live tests are caution work.

How it works

Power board feeds the main board (webOS) and the LED backlight; a dark screen with sound is usually backlight strips or driver.

eARC is on HDMI 2; a soundbar plugged into another input will not get TV audio back.

60 Hz panel: no 4K 120 for consoles; that is a spec limit, not a fault.

Components & tests

Unlock all 3 components, specs, service mode and teardown

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

Get lifetime access

Official manufacturer documentation

Always confirm values against the tech sheet for the exact model.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work. © 2026 OnCall Tech. Original content; not a reproduction of any manufacturer document.Generic part photos (not of this brand): LCD TV with the panel removed, showing the grid of lit LED backlights by RobertKuhlmann, CC BY-SA 3.0

Diagnostic guides for this appliance

Guide · TV

TVs: standby LED blink patterns, why they are model-specific, and how to use them

Some makers use the standby LED as a self-diagnosis output. Sony, for example, repeats a group of blinks with a pause, and the count names a fault area. The meaning of a count depends on the maker and the chassis, so one model's table does not apply to another. Samsung's support simply says that if the red light still blinks after a power cycle on a known-good outlet, the set needs service. Use the blink only to separate power-delivery problems from internal faults and to point to a board.

6 steps ~20 minmoderate
Guide · TV

TV antenna finds no channels (or loses channels after a scan)

Most antenna problems are setup and signal, not a bad tuner: wrong input or scan type, a loose or damaged coax, an unpowered amplifier, an antenna in a poor spot, a splitter that cuts the signal, or a signal so strong it overloads the tuner. Stations also move or change format, so a rescan is the first step any time channels disappear.

6 steps ~30 mineasy
Guide · TV

TV talks: a voice reads every menu or describes the show

This is an accessibility feature that was switched on, often by accident through a remote shortcut (holding Mute or Volume, or pressing Star several times). A voice reading menus is the screen reader (Voice Guide, Audio Guidance, Screen reader). A voice describing the show is audio description, which may be a TV setting or the streaming app's audio track. Nothing is broken.

5 steps ~10 mineasy

Other tvs manuals

LG UHD UT7000 (2024, webOS 24): quick sheet · OnCall Tech