Thermador · Range / Oven error code
Unlock what this code means, its causes, tests and parts
Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.
Get lifetime accessOnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.
Guide · Range / OvenThe control will not heat for self-clean until the lock switch confirms the door is locked. Check that the door closes fully, then whether the lock motor moves at all: no movement points to the motor or the control output; movement without confirmation points to the switch, latch binding or wiring.
Guide · Range / OvenOven F-codes point to a circuit: temperature sensor, door lock, keypad or control. GE ovens show F plus a number; Whirlpool-family ovens show F#E#. Both makers tell owners to clear the display, cut power at the breaker for a short time and watch whether the code returns. A code that returns is a real fault. An over-temperature code is a safety stop: do not keep using the oven.
Guide · Range / OvenMost of these calls are the Control Lock (child lock) feature, which disables the pads and on some models locks the door. It is released with a press-and-hold on a specific pad, and the key differs by brand and model. Some ovens also lock the panel automatically during self-clean, a probe cook or twin-cavity modes. Only if the lock will not release, or comes back after a power reset, is it a door-lock or control fault.
Thermador · Range / Oven
dE
Demo mode active
Thermador · Range / Oven
E101 / E104
Upper/single cavity temperature sensor open (E101) or shorted (E104)
Thermador · Range / Oven
E7010
Cannot connect to Wi-Fi or hood
Thermador · Range / Oven
E8204
Wireless cooking sensor battery low
Thermador · Range / Oven
E8205
Wireless cooking sensor lost connection
Thermador · Range / Oven
E8206
Wireless cooking sensor fault