JennAir · Range / Oven error code
Unlock what this code means, its causes, tests and parts
Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.
Get lifetime accessOnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.
Guide · Range / OvenOven F-codes point to a circuit: temperature sensor, door lock, keypad or control. GE ovens show F plus a number; Whirlpool-family ovens show F#E#. Both makers tell owners to clear the display, cut power at the breaker for a short time and watch whether the code returns. A code that returns is a real fault. An over-temperature code is a safety stop: do not keep using the oven.
Guide · Range / OvenElectric and many gas ranges and wall ovens have a cooling fan that protects the controls, door and cabinetry; it keeps running after the oven is off until the controls area cools, and cannot be switched off. Running for a while after a long or hot bake is normal; running with the oven cold, starting at power-up or never stopping points to a fan thermostat stuck closed, a welded relay, a bad temperature sensor reading or a control fault. A fan that never runs is a safety issue because the controls overheat.
Guide · Range / OvenThe oven sensor is a thin probe at the top rear of the oven cavity, held by two screws, with a plug just behind the wall. Test it first, then pull it forward, unplug it without losing the connector into the wall, and plug in the new one. Electric and gas ovens use the same approach for the sensor; no gas parts are touched.
JennAir · Range / Oven
F1E1
Appliance manager control fault
JennAir · Range / Oven
F2E1
Stuck or shorted key
JennAir · Range / Oven
F3E0
Oven temperature sensor circuit fault
JennAir · Range / Oven
F5E0
Door switch and latch switch disagree
JennAir · Range / Oven
F5E1
Door lock latch not operating
JennAir · Range / Oven
F9E0
Supply wiring fault