JennAir · Range / Oven error code

F1E1Appliance manager control fault

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Range / Oven

Ranges and wall ovens: reading F-codes and F#E# codes (GE, Whirlpool family) and when a reset is safe

Oven F-codes point to a circuit: temperature sensor, door lock, keypad or control. GE ovens show F plus a number; Whirlpool-family ovens show F#E#. Both makers tell owners to clear the display, cut power at the breaker for a short time and watch whether the code returns. A code that returns is a real fault. An over-temperature code is a safety stop: do not keep using the oven.

7 steps ~20 mineasy

Guide · Range / Oven

Gas oven lights then goes out, or keeps re-igniting

First separate normal cycling from a fault: the burner shuts off and relights to hold temperature. On glow-bar (hot-surface) ovens, a weak igniter can glow but pass too little current to hold the safety valve open, so the flame drops out. On direct spark ignition (DSI) ovens the module must sense the flame through the ground path; a poor ground, reversed polarity, a dirty or cracked electrode or a failing DSI module makes it lose the flame and re-spark. The gas valve, pressure and orifices are licensed gas-technician work only.

8 steps ~60 minmoderate

Guide · Range / Oven

Oven cooling fan keeps running after the oven is off (or never runs)

Electric and many gas ranges and wall ovens have a cooling fan that protects the controls, door and cabinetry; it keeps running after the oven is off until the controls area cools, and cannot be switched off. Running for a while after a long or hot bake is normal; running with the oven cold, starting at power-up or never stopping points to a fan thermostat stuck closed, a welded relay, a bad temperature sensor reading or a control fault. A fan that never runs is a safety issue because the controls overheat.

8 steps ~60 minmoderate

More JennAir range / oven codes

JennAir · Range / Oven

F2E1

Stuck or shorted key

Cross-checked High-voltage / caution

JennAir · Range / Oven

F3E0

Oven temperature sensor circuit fault

Cross-checked

JennAir · Range / Oven

F3E1

Lower oven temperature sensor fault

Cross-checked High-voltage / caution

JennAir · Range / Oven

F5E0

Door switch and latch switch disagree

Cross-checked High-voltage / caution

JennAir · Range / Oven

F5E1

Door lock latch not operating

Cross-checked High-voltage / caution

JennAir · Range / Oven

F9E0

Supply wiring fault

Cross-checked High-voltage / caution