Wolf · Range / Oven error code
Unlock what this code means, its causes, tests and parts
Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.
Get lifetime accessOnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.
Component test · Range / OvenSelf-clean ovens use a small motor or solenoid with cam switches that tell the control the lock position. A lock stuck after self-clean is often a cooled-down timing issue; check the motor, the switches and the control output.
Guide · Range / OvenInduction only heats magnetic cookware large enough for the zone and centered on it. Rule out cookware first; if good pans fail on a zone, the zone's coil, generator (inverter) board or firmware is at fault, which is board-level service.
Guide · Range / OvenOven F-codes point to a circuit: temperature sensor, door lock, keypad or control. GE ovens show F plus a number; Whirlpool-family ovens show F#E#. Both makers tell owners to clear the display, cut power at the breaker for a short time and watch whether the code returns. A code that returns is a real fault. An over-temperature code is a safety stop: do not keep using the oven.
Wolf · Range / Oven
10 0 0
UIM communication error
Wolf · Range / Oven
3222 / 3221
Oven RTD sensor open
Wolf · Range / Oven
4910
Upper cooling fan stalled
Wolf · Range / Oven
COMM ERR
Communication lost with oven controller
Wolf · Range / Oven
COOL FAN
Cooling fan failure reported
Wolf · Range / Oven
E01
Memory (EEPROM) read error