Wolf · Range / Oven error code
Unlock what this code means, its causes, tests and parts
Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.
Get lifetime accessOnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.
Guide · Range / OvenOven F-codes point to a circuit: temperature sensor, door lock, keypad or control. GE ovens show F plus a number; Whirlpool-family ovens show F#E#. Both makers tell owners to clear the display, cut power at the breaker for a short time and watch whether the code returns. A code that returns is a real fault. An over-temperature code is a safety stop: do not keep using the oven.
Guide · Range / OvenSelf-clean runs the oven far hotter than baking, so the weakest heat-sensitive parts fail then: a thermal fuse or thermal cut-off, a high-limit, the door lock motor or switches, wiring at the back and sometimes the control. Techs check the cheap safety devices and wiring first; jumping straight to the control board is the common wrong turn.
Component test · Range / OvenSelf-clean ovens use a small motor or solenoid with cam switches that tell the control the lock position. A lock stuck after self-clean is often a cooled-down timing issue; check the motor, the switches and the control output.
Wolf · Range / Oven
10 0 0
UIM communication error
Wolf · Range / Oven
3222 / 3221
Oven RTD sensor open
Wolf · Range / Oven
4910
Upper cooling fan stalled
Wolf · Range / Oven
COOL FAN
Cooling fan failure reported
Wolf · Range / Oven
E01
Memory (EEPROM) read error
Wolf · Range / Oven
E03
Wrong process data loaded