Wolf · Range / Oven error code
Unlock what this code means, its causes, tests and parts
Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.
Get lifetime accessOnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.
Guide · Range / OvenThe oven sensor is a thin probe at the top rear of the oven cavity, held by two screws, with a plug just behind the wall. Test it first, then pull it forward, unplug it without losing the connector into the wall, and plug in the new one. Electric and gas ovens use the same approach for the sensor; no gas parts are touched.
Component test · Range / OvenMost electronic ovens use a platinum RTD probe, which works the opposite way to an NTC: resistance rises with heat. Many common sensors read about 1,080 Ω at room temperature and climb roughly 2 Ω per °F.
Guide · Range / OvenOven F-codes point to a circuit: temperature sensor, door lock, keypad or control. GE ovens show F plus a number; Whirlpool-family ovens show F#E#. Both makers tell owners to clear the display, cut power at the breaker for a short time and watch whether the code returns. A code that returns is a real fault. An over-temperature code is a safety stop: do not keep using the oven.
Wolf · Range / Oven
10 0 0
UIM communication error
Wolf · Range / Oven
4910
Upper cooling fan stalled
Wolf · Range / Oven
COMM ERR
Communication lost with oven controller
Wolf · Range / Oven
COOL FAN
Cooling fan failure reported
Wolf · Range / Oven
E01
Memory (EEPROM) read error
Wolf · Range / Oven
E03
Wrong process data loaded