Viking · Range / Oven error code

F07Door switch fault

Single source Power off, standard tools

Unlock what this code means, its causes, tests and parts

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Range / Oven

Range or wall oven shows LOC, Lock or a padlock and won't respond

Most of these calls are the Control Lock (child lock) feature, which disables the pads and on some models locks the door. It is released with a press-and-hold on a specific pad, and the key differs by brand and model. Some ovens also lock the panel automatically during self-clean, a probe cook or twin-cavity modes. Only if the lock will not release, or comes back after a power reset, is it a door-lock or control fault.

5 steps ~15 mineasy

Guide · Range / Oven

Oven cooling fan keeps running after the oven is off (or never runs)

Electric and many gas ranges and wall ovens have a cooling fan that protects the controls, door and cabinetry; it keeps running after the oven is off until the controls area cools, and cannot be switched off. Running for a while after a long or hot bake is normal; running with the oven cold, starting at power-up or never stopping points to a fan thermostat stuck closed, a welded relay, a bad temperature sensor reading or a control fault. A fan that never runs is a safety issue because the controls overheat.

8 steps ~60 minmoderate

Guide · Range / Oven

Oven door stuck locked after self-clean

The lock stays engaged until the cavity cools (most models release below about 550°F). If it stays locked when cold, the lock motor, its position switch or the control is at fault. Dead ovens after self-clean often have an open thermal fuse.

5 steps ~60 minmoderate