Sub-Zero / Wolf · Wine Cooler error code

11 / 13Cabinet cold alarm (upper 11, lower 13)

Single source Power off, standard tools

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Wine Cooler

Wine cooler too cold or bottles freezing

Over-cooling comes from a cold room (especially with thermoelectric units, which have no heater), an iced evaporator, a blocked internal fan, or a failed sensor/control.

4 steps ~30 mineasy

Guide · Wine Cooler

Display shows an error, HI/LO, or does not respond

Many alarms (HI/LO, door) clear once the door is closed and the cabinet recovers. Sensor codes point to a thermistor or its wiring. A dead display with power present is usually the display board.

4 steps ~30 mineasy

Guide · Wine Cooler

Thermoelectric wine cooler not cooling (fans run, cabinet near room temperature)

Thermoelectric coolers move heat with a solid-state Peltier module and two heat-sink fans, so they can only pull the cabinet a limited amount below room air. Rule out a hot room, blocked airflow and dusty fins before condemning the module, its fans or the DC power supply.

5 steps ~45 minmoderate

More Sub-Zero / Wolf wine cooler codes

Sub-Zero / Wolf · Wine Cooler

05 / 07

Cabinet thermistor fault (upper 05, lower 07)

Cross-checked

Sub-Zero / Wolf · Wine Cooler

06 / 08

Evaporator thermistor fault (upper 06, lower 08)

Single source

Sub-Zero / Wolf · Wine Cooler

10 / 12

Cabinet warm alarm (upper 10, lower 12)

Single source High-voltage / caution

Sub-Zero / Wolf · Wine Cooler

Sealed-system fault

Cross-checked Licensed pro only