Sub-Zero / Wolf · Wine Cooler error code

10 / 12Cabinet warm alarm (upper 10, lower 12)

Single source High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Wine Cooler

Wine cooler not cooling (thermoelectric vs compressor)

First identify the type: thermoelectric units (quiet, no compressor) are limited by room temperature and depend on their fans and heat sinks; compressor units depend on a clean condenser and working fans. Many no-cool calls are ventilation, door seal or room temperature problems.

7 steps ~45 minmoderate

Guide · Wine Cooler

Dual-zone wine cooler: one zone warm, the other fine

When one zone of a dual-zone cooler works, the compressor or main cooling is usually alive. Focus on what each zone has on its own: its sensor, its fan, its air path or damper, its door seal and its section of the control.

6 steps ~60 minmoderate

Guide · Wine Cooler

Wine cooler too cold or bottles freezing

Over-cooling comes from a cold room (especially with thermoelectric units, which have no heater), an iced evaporator, a blocked internal fan, or a failed sensor/control.

4 steps ~30 mineasy

More Sub-Zero / Wolf wine cooler codes

Sub-Zero / Wolf · Wine Cooler

05 / 07

Cabinet thermistor fault (upper 05, lower 07)

Cross-checked

Sub-Zero / Wolf · Wine Cooler

06 / 08

Evaporator thermistor fault (upper 06, lower 08)

Single source

Sub-Zero / Wolf · Wine Cooler

11 / 13

Cabinet cold alarm (upper 11, lower 13)

Single source

Sub-Zero / Wolf · Wine Cooler

Sealed-system fault

Cross-checked Licensed pro only