Frigidaire / Electrolux · Dryer error code

E95 (dryer)Supply voltage error

Single source High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Dryer

Electric dryer runs but no heat

Most electric no-heat calls come down to supply voltage (one breaker leg), a blown thermal fuse from a restricted vent, a tripped high-limit, or an open element. Always fix the airflow cause, or the new fuse will blow again.

7 steps ~60 minmoderate

Guide · Dryer

Gas dryer runs but no heat (electrical checks only)

On a gas dryer the electrical side of the burner can be diagnosed safely with gas and power off: thermal fuse, high-limit, cycling thermostat, igniter, flame (radiant) sensor and gas valve coils. Gas supply, gas lines, the valve body and gas pressure are off-limits: refer to a licensed gas technician.

6 steps ~60 minadvanced

Guide · Dryer

Dryer won't start

Separate 'dead' (no display) from 'display OK but no start'. Common causes are supply, door switch, thermal fuse (on designs where it is in the motor/control circuit), start switch, belt switch and the drive motor.

5 steps ~45 minmoderate