8 components coveredField manual · Dryer
GE GTD45 27-inch dryer (7.2 cu ft, top-load companion): quick sheet
Covers: GTD45EASJWS (electric) and GTD45GASJWS (gas), plus later revisions. J = model-year letter (not confirmed by two sources). Not covered by our GTD42/GTD65 sheet.
Basic GE top-load-companion dryer: four cycles, Sensor Dry, four heat settings, extended tumble, aluminized alloy drum, venting rated up to 120 ft, reversible door, no steam. Deep diagnostics: GE dryer field service manual.
Safety first
- Electric dryer: 240 V. Unplug or turn off the 30 A breaker before any panel comes off.
- Never bypass the thermal fuse, cutoff or high-limit, even for a test.
- A blown thermal fuse is a symptom: inspect and clean the whole vent before returning the dryer to service.
- Gas twin: smell gas = stop, no switches or flames, leave and call the gas utility. Work on the gas valve, gas line, orifice or burner adjustment is for a licensed gas technician; this sheet covers the electrical checks only (gas supply OFF and unit unplugged).
How it works
Single motor drives the drum by belt and runs the blower; heat is switched by the control once the motor runs.
Sensor Dry uses the drum sensor bars and the outlet thermistor to end the cycle.
Components & tests
Unlock all 8 components, specs, service mode and teardown
Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.
Get lifetime accessOfficial manufacturer documentation
Always confirm values against the tech sheet for the exact model.
OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work. © 2026 OnCall Tech. Original content; not a reproduction of any manufacturer document.Generic part photos (not of this brand): Basement laundry area with a top-load washer and dryer next to utility equipment by Đỗ Huy Hoàng, Pexels License