Whirlpool / Maytag / KitchenAid / Amana · Washer error code

F43 / F44Heater stuck on / will not turn on

Single source High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Component test · Washer

Washer motor control unit / inverter board

Direct-drive and inverter washers use a motor control unit (MCU) that powers a 3-phase motor and reads a hall sensor or tach. Separate MCU, motor windings, hall sensor and harness before buying a board.

6 steps ~45 minadvanced

Component test · Washer

Washer door / lid lock assembly

A lock assembly has a lock actuator (solenoid, motor, or wax/PTC heater) and one or more switches that tell the board it is locked. Check the command from the board, the actuator, the switch and the strike.

5 steps ~30 minmoderate

Guide · Washer

Wash water not warm enough

Most washers rely on the home water heater; long pipe runs and eco settings reduce temperature. Check supply, hoses, valve and sensor.

4 steps ~40 minmoderate