Whirlpool / Maytag / KitchenAid · Refrigerator error code

Flashing F (F3 E1, F3 E2, F3 E4, F4 E1, F6 E1, F8 E1, etc.)Control-detected fault (meaning by F/E pair on the tech sheet)

Cross-checked Power off, standard tools

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Refrigerator

Premium built-in refrigerator: one section warm (Sub-Zero vs. Monogram logic)

Start by knowing the architecture. Sub-Zero built-ins have two separate sealed systems, so a warm section means a fault in that section's own fan, defrost, sensor or system. Monogram built-ins share one freezer evaporator and feed fresh food through a damper, so a warm fresh-food side with a cold freezer points at the damper, airflow or an iced return passage.

6 steps ~60 minmoderate

Guide · Refrigerator

Top-mount refrigerator: defrost timer and cold control check

On conventional top-mounts, a mechanical defrost timer and a cold control decide when the unit cools or defrosts. Advancing the timer by hand tells you in minutes whether the timer, the defrost parts or the cold control is at fault.

5 steps ~45 minmoderate

Component test · Refrigerator

How to test a refrigerator mechanical defrost timer

Older refrigerators use a motor-driven timer that switches between cooling and defrost. Turning the advance screw lets you force defrost and test the contacts; terminal numbering varies, so use the diagram on the timer or tech sheet.

7 steps ~30 minmoderate