Whirlpool / Maytag / KitchenAid / Amana · Microwave error code

F2 / F2E1Keypad (user interface) fault

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Microwave

Microwave has display/clock but won't start

Rule out user settings first (control lock, demo mode, Start not pressed, shipping spacer). If those are fine, the control is not seeing a closed door or is not driving its relays: door switches, latch, or control board.

6 steps ~45 minmoderate

Guide · Microwave

Microwave starts by itself or will not stop

A microwave that heats on its own is a fire hazard: unplug it and do not use it. The usual cause is a stuck relay or shorted triac on the control. On OTR units, a fan that starts by itself is often normal heat protection, and a light that stays on can be moisture.

4 steps ~30 minadvanced

Guide · Microwave

Microwave keypad not responding (or phantom presses)

Rule out control lock first. Then the usual causes are a worn or moisture-damaged membrane keypad or a loose ribbon at the control board. Unplugging the keypad ribbon separates a bad keypad from a bad board. The control board sits next to high-voltage parts on most models.

4 steps ~30 minmoderate