Noritz · Water Heater error code

10Combustion / exhaust problem

Single source Licensed pro only

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

Stop: this involves gas or the sealed refrigerant system.

OnCall Tech only describes the symptom. Gas work needs a licensed gas technician, and refrigerant work requires EPA Section 608 certification. If you smell gas: shut off the supply if it is safe, do not switch anything on or off, ventilate, leave the building and call the gas utility.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Water Heater

Anode rod: inspect and replace

The sacrificial anode protects the tank from corrosion. When it is mostly consumed (core wire exposed), replace it. Powered anodes are an option where odor is a problem.

4 steps ~60 minmoderate

Install · Water Heater

Gas water heater replacement (BLOCKED: refer to a licensed plumber / gas installer)

Replacing a gas water heater involves the gas connection, flue venting and combustion air, which are licensed work. The handyman role is to assess, take immediate safety action and refer.

3 steps ~15 minadvanced

Guide · Water Heater

Water heater leaking: fitting or tank?

The key question is whether the water comes from the plumbing (repairable) or the tank itself (replace the heater). Work from the top down: supply connectors, nipples, T&P valve and its pipe, drain valve, element gaskets. Water from the bottom, under the jacket, or a rusty combustion chamber means the tank has failed.

5 steps ~30 mineasy