Mitsubishi Electric · Air Conditioner error code

UP / UFCompressor overcurrent / locked compressor

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Air Conditioner

PTAC not cooling (fan runs, air not cold)

Most PTAC no-cool calls are airflow (filter, coils), a wrong control setting or a failed compressor start component. Rule those out before suspecting the sealed system.

6 steps ~60 minmoderate

Guide · Air Conditioner

AC/heat pump outdoor fan not spinning

On conventional units the usual causes are a failed fan capacitor, a seized motor or a contactor problem. On inverter mini-splits the fan is driven by the board and usually posts a fan error code.

5 steps ~45 minmoderate

Guide · Air Conditioner

Air conditioner tripping the breaker

Find out when it trips: instantly (short to ground), at compressor start (hard start, bad capacitor, weak breaker) or after running (overload, loose connection heating up). Never upsize a breaker beyond the nameplate maximum.

6 steps ~60 minadvanced