LG · Washer error code

SESensor error (hall/speed sensor)

Single source High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Component test · Washer

Hall sensor and tach generator (motor speed feedback)

Hall sensors are 3-wire devices (supply, ground, signal) that switch as magnets pass; tach generators are 2-wire coils that make a small AC voltage as the motor turns. Test the right way for the type.

6 steps ~30 minmoderate

Component test · Washer

Washer motor control unit / inverter board

Direct-drive and inverter washers use a motor control unit (MCU) that powers a 3-phase motor and reads a hall sensor or tach. Separate MCU, motor windings, hall sensor and harness before buying a board.

6 steps ~45 minadvanced

Guide · Washer

LG LE code: testing the hall sensor and stator

LE means the board drove the motor but did not see rotation. Check the harness, then test the hall sensor (about 10 kΩ per channel and a pulsing signal), then the stator windings, before condemning the board.

5 steps ~60 minadvanced

More LG washer codes

LG · Washer

Internal leak (front-load)

Cross-checked

LG · Washer

Motor over-current

Cross-checked High-voltage / caution

LG · Washer

Child/control lock (not a fault)

Cross-checked

LG · Washer

dE / dE1

Door/lid open or not detected closed

Cross-checked

LG · Washer

dE2 / E30

Door closed but not locking

Cross-checked

LG · Washer

dE4

Drawer not closed / combo heat-pump fault

Single source High-voltage / caution