Heil / Tempstar / Comfortmaker / KeepRite (ICP) · Furnace error code

2 flashesPressure switch did not open

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Furnace

Reading furnace LED flash codes by brand family (Carrier, Goodman, ICP, Rheem)

The flash code narrows the fault to one circuit before you open anything. Read it with power on, identify the board family, then use the door label to confirm. Only codes that two independent sources agree on are listed here.

8 steps ~10 mineasy

Guide · Furnace

Pressure switch open / inducer problems

The pressure switch proves the inducer is moving combustion gases. It stays open when the vent/intake is blocked, the hose or port is plugged, the condensate trap backs up, or the inducer is weak.

5 steps ~45 minmoderate

Guide · Furnace

Furnace inducer (draft) motor not starting

Work from mechanical to electrical: does the wheel turn freely, is 120 V reaching the motor, and is the board sending it. A seized motor is replaced as an assembly; no output from the board points to the board relay or a safety input.

8 steps ~40 minmoderate