GE · Range / Oven error code
Unlock what this code means, its causes, tests and parts
Full library + AI assistant for $34.90, one time.
Get lifetime accessOnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.
Guide · Range / OvenThe control will not heat for self-clean until the lock switch confirms the door is locked. Check that the door closes fully, then whether the lock motor moves at all: no movement points to the motor or the control output; movement without confirmation points to the switch, latch binding or wiring.
Component test · Range / OvenSelf-clean ovens use a small motor or solenoid with cam switches that tell the control the lock position. A lock stuck after self-clean is often a cooled-down timing issue; check the motor, the switches and the control output.
Guide · Range / OvenThe lock stays engaged until the cavity cools (most models release below about 550°F). If it stays locked when cold, the lock motor, its position switch or the control is at fault. Dead ovens after self-clean often have an open thermal fuse.
GE · Range / Oven
Bad Line
Miswired supply
GE · Range / Oven
F0
Stuck key or control fault
GE · Range / Oven
F1
Keypanel or control fault
GE · Range / Oven
F2
Oven over-temperature
GE · Range / Oven
F3
Oven sensor circuit open
GE · Range / Oven
F4
Oven sensor circuit shorted