GE Profile Opal · Ice Maker error code

White ringBin full (solid white ring)

Cross-checked Power off, standard tools

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Ice Maker

Full-bin sensor: overfilling or stopping too early

Bin controls are infrared/optical sensors (countertop, Opal), thermostatic bulbs (Hoshizaki) or thermistor sensors. Dirty, blocked, loose or misplaced sensors cause over- or under-production.

5 steps ~30 mineasy

Guide · Ice Maker

Ice machine slime, mold or scale

Scale and biofilm slow harvest and trigger long-cycle codes (e.g. Hoshizaki 2 beeps, Scotsman 2). Clean and sanitize per the manufacturer's procedure and replace the water filter.

5 steps ~90 minmoderate

Guide · Ice Maker

Countertop ice maker shows 'Add Water' with water in the reservoir

These units detect water with a float, probe or wire sensor in the reservoir and a small pump that lifts water to the tray. Scale on the sensor, a blocked reservoir screen, a stuck float, very pure water or a weak pump can all trigger a false Add Water.

4 steps ~30 mineasy

More GE Profile Opal ice maker codes

GE Profile Opal · Ice Maker

Add Water

Reservoir needs water

Cross-checked

GE Profile Opal · Ice Maker

Blue ring

Needs water (or cannot sense/pump water)

Cross-checked

GE Profile Opal · Ice Maker

Descale light

Descale reminder

Cross-checked

GE Profile Opal · Ice Maker

Filter light pulsing

Replace filter (single source)

Single source

GE Profile Opal · Ice Maker

Green ring blinking

Unit losing power / cycling on its own

Cross-checked

GE Profile Opal · Ice Maker

Pulsing / spinning yellow ring

Clean or rinse cycle in progress

Cross-checked