GE Profile Opal · Ice Maker error code

Blue ringNeeds water (or cannot sense/pump water)

Cross-checked Power off, standard tools

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Ice Maker

Countertop ice maker shows 'Add Water' with water in the reservoir

These units detect water with a float, probe or wire sensor in the reservoir and a small pump that lifts water to the tray. Scale on the sensor, a blocked reservoir screen, a stuck float, very pure water or a weak pump can all trigger a false Add Water.

4 steps ~30 mineasy

Guide · Ice Maker

Undercounter ice maker not making ice

Check power, water supply and pressure, drain (pump models stop when they cannot drain), bin sensor, cleaning status, condenser and room temperature. Scale is the most common cause on older machines.

7 steps ~60 minmoderate

Guide · Ice Maker

GE Opal nugget ice maker not making ice / descaling

Most no-ice Opal calls are water starvation (low reservoir, side-tank hose, clogged filter, air) or scale. Follow GE's clean/descale procedure with intervals based on water hardness. Continuous grinding is not normal and goes to Opal support.

5 steps ~60 mineasy

More GE Profile Opal ice maker codes

GE Profile Opal · Ice Maker

Add Water

Reservoir needs water

Cross-checked

GE Profile Opal · Ice Maker

Descale light

Descale reminder

Cross-checked

GE Profile Opal · Ice Maker

Filter light pulsing

Replace filter (single source)

Single source

GE Profile Opal · Ice Maker

Green ring blinking

Unit losing power / cycling on its own

Cross-checked

GE Profile Opal · Ice Maker

Pulsing / spinning yellow ring

Clean or rinse cycle in progress

Cross-checked

GE Profile Opal · Ice Maker

Sanitize light

Sanitize reminder (single source)

Single source