Bosch · Dryer error code

E63 (dryer)Heating element failure

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Component test · Dryer

How to test a high-limit thermostat (dryer and similar heaters)

A high-limit is a normally-closed bimetal switch that opens if the heater area overheats and closes again when it cools. A room-temperature continuity test catches the common "stuck open" failure, but it cannot prove the opening temperature is right.

5 steps ~20 mineasy

Component test · Dryer

How to test a dryer heating element

An electric dryer element is a resistance coil on 240 V. Test it across the terminals and to ground. Most read in the low teens of ohms; use R = V²/W from the element rating to check yours.

6 steps ~40 minmoderate

Guide · Dryer

Electric dryer runs but no heat

Most electric no-heat calls come down to supply voltage (one breaker leg), a blown thermal fuse from a restricted vent, a tripped high-limit, or an open element. Always fix the airflow cause, or the new fuse will blow again.

7 steps ~60 minmoderate