Basement Watchdog (Glentronics) · Sump / Well Pump error code

Battery light + alarmBattery low or faulty

Single source High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Sump / Well Pump

Battery backup sump pump alarm

Backup controllers alarm for four main reasons: no AC power, low or failed battery, blown fuse, or the backup pump had to run. A backup pump run means the primary pump needs attention now.

5 steps ~30 mineasy

Guide · Sump / Well Pump

Air spitting or sputtering from faucets on a well system

Air in a well system usually enters because the pump is drawing down the well (low water level) or because a leak or failed check valve lets the line drain back and suck air in when the pump stops. A failed pressure-tank bladder can also send air into the lines.

4 steps ~45 minmoderate

Guide · Sump / Well Pump

Sump pump won't turn on (float or power)

Prove power, then prove the pump by bypassing the float, then fix the float. Most residential pumps with a piggyback plug make this a two-minute test.

4 steps ~30 mineasy

More Basement Watchdog (Glentronics) sump / well pump codes

Basement Watchdog (Glentronics) · Sump / Well Pump

Fuse light + alarm

Backup pump fuse blown

Single source High-voltage / caution

Basement Watchdog (Glentronics) · Sump / Well Pump

Power light + alarm

No AC power to the controller

Single source

Basement Watchdog (Glentronics) · Sump / Well Pump

Pump (Pump was activated) light + alarm

Backup pump ran

Single source