Washer rattles, buzzes or grinds only while draining

Noise only during drain points at the drain pump or what is in it: a coin, button or underwire caught in the pump chamber or impeller, or a worn pump. Some buzzing is external: hoses resting on the cabinet or loose items on top. Clear the trap and pump before replacing anything.

Cross-checked ~30 min easyBrands: All

Before you start

Unplug the washer before opening the pump filter or removing the pump
Drain the tub fully first; open the filter slowly into a pan

Diagnostic steps

Unlock all 4 steps with expected values

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

Get lifetime access

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

More washers guides

Guide · Washer

Whirlpool family washers & dryers: reading F#E# codes, Service Diagnostic Mode and fault history

Whirlpool-family electronic laundry stores its last few faults as a pair: the F number names the system and the E number names the suspect part. Most knob-and-button consoles reach Service Diagnostic Mode by pressing three buttons in a set order three times in a row within a few seconds; newer touch consoles use a different entry. The exact buttons are on the tech sheet hidden in the console, so read it first and never guess.

8 steps ~15 mineasy

Guide · Washer

Samsung washers & dryers: display codes vs information codes, SmartThings and Smart Care, and service-mode code history

Samsung splits codes into information codes (a user or installation condition such as swapped hot and cold hoses or an unlatched door) and real error codes. The same fault may read differently by generation: older machines used E-numbers or 4E-style codes, newer ones 4C-style, some top-loaders nF. Wi-Fi models push codes to SmartThings when they happen; Smart Care is a separate camera-based check that only reads its own test, not real codes. Many models also keep a stored-code list in a service mode whose buttons vary by model.

7 steps ~20 mineasy

Guide · Washer

Washer routine service: tub-clean cycle, door boot, dispenser, pump filter and hoses (front and top load)

All the major brands build in a cleaning cycle and remind the user about once a month or every 20-40 loads: Whirlpool about every 30 cycles, LG after about 30 cycles ('tcL'), Samsung after 40 washes on front-loaders and 20 on top-loaders. A pro service adds what the cycle misses: the door boot, dispenser, drain pump filter on front-loaders and a hose inspection.

6 steps ~45 mineasy