Range install and anti-tip bracket

Every freestanding and slide-in range must be secured with the anti-tip bracket that ships with it, fixed to the wall or floor and engaged by the rear foot. Electric ranges connect with a cord to a 240 V receptacle; gas connections are for a licensed gas installer.

Cross-checked ~60 min moderateBrands: All

Before you start

A range without an engaged anti-tip bracket can tip forward when weight is put on the open door: this has caused serious injuries and deaths, so never skip it.
Gas connection, gas line and leak testing: BLOCKED, refer to a licensed gas installer.
Unplug / breaker off before working behind an electric range.

Diagnostic steps

Unlock all 6 steps with expected values

Full library + AI assistant for $34.90, one time.

Get lifetime access

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

More ranges & ovens guides

Component test · Range / Oven

How to test an oven RTD temperature sensor

Most electronic ovens use a platinum RTD probe, which works the opposite way to an NTC: resistance rises with heat. Many common sensors read about 1,080 Ω at room temperature and climb roughly 2 Ω per °F.

6 steps ~20 mineasy

Component test · Range / Oven

How to test an oven bake or broil element

Bake and broil elements are 240 V resistance heaters. A good one reads somewhere in the teens to about 40 Ω depending on wattage, and never shows continuity to its metal sheath.

6 steps ~20 mineasy

Component test · Range / Oven

How to test an infinite switch (electric surface element)

An infinite switch cycles a surface element on and off to set the heat level. Test the two line-to-element contact pairs on high and off. Also test the element itself before replacing the switch.

6 steps ~20 mineasy