Takagi / A.O. Smith tankless · Water Heater error code

031Incorrect DIP switch setting

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Water Heater

Reading the gas control status LED (Rheem, A.O. Smith/State, Bradford White)

Thermopile-powered gas controls report their state by counting blinks, then pausing. Reading the code correctly tells you whether the problem is the pilot, low thermopile power, overheating, a sensor or the control itself. Only codes confirmed by two sources are listed; everything gas-side is diagnosed here and referred to a licensed gas technician.

10 steps ~15 mineasy

Guide · Water Heater

Power-vent gas water heater: blower won't start, runs without firing, or locks out

Power-vent tanks add a 120 V blower, an air pressure switch and often a vent temperature limit. Most no-heat calls are electrical supply, a kinked or water-filled pressure switch tube, condensate in the blower, or a restricted vent. The tech checks power and the low-voltage safety chain and inspects visually; gas valve, burner, igniter/flame sensor and vent repairs are referred to a licensed gas technician.

10 steps ~45 minmoderate

Install · Water Heater

Thermal expansion tank install

An expansion tank absorbs the water that expands as the heater warms it. Set the tank air pre-charge to match the home static water pressure (or the PRV setting) before installing, then mount it on the cold supply to the heater and support its weight.

5 steps ~60 minmoderate