Rheem / Ruud · Furnace error code

5 flashesTwinning circuit fault

Single source High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant + the OnCall Tech app for iPhone & Android. $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Furnace

Furnace control boards: last-fault memory, fault recall and power-cycle rules (Carrier/Bryant, ICP, Goodman/Amana, Rheem/Ruud, Trane, Lennox)

Furnace boards show the current state on an LED or a 7-segment display, and many also keep a fault history. Some keep it only until power is removed; one Carrier-family description says stored codes clear on power loss or about 48 hours after the fault. Others have a fault-recall push button or recall terminal that replays recent faults. Read the LED through the door sight glass first; removing the blower door usually opens the door switch and drops power to the board.

7 steps ~15 mineasy

Guide · Furnace

Reading furnace LED flash codes by brand family (Carrier, Goodman, ICP, Rheem)

The flash code narrows the fault to one circuit before you open anything. Read it with power on, identify the board family, then use the door label to confirm. Only codes that two independent sources agree on are listed here.

8 steps ~10 mineasy

Guide · Furnace

Flame sensor microamp test and cleaning (measuring flame signal)

Measure the actual flame current in series with a µA DC meter before and after cleaning. A clean sensor with a low reading points to ground, wiring, board or burner flame problems rather than the rod itself.

8 steps ~30 minmoderate