Google Nest · Thermostat error code

E54 / E104 / E184Overcurrent on G (fan)

Cross-checked High-voltage / caution

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Thermostat

Indoor fan won't turn off from the thermostat

Start at the thermostat: fan set to ON instead of AUTO, or a setpoint the system can never reach. If the thermostat is right, the cause is in the equipment: a stuck fan relay, a limit switch keeping the blower on, a shorted G wire or a control board fault.

4 steps ~40 minmoderate

Guide · Thermostat

Thermostat calls but heat or cooling does not start

Split the problem in two: is the thermostat sending 24 V on the call wire, and is the equipment responding to it? A jumper test at the board answers that in minutes.

5 steps ~40 minmoderate

Guide · Thermostat

Smart thermostat offline / Wi-Fi problems

Separate network problems (router, credentials, internet) from power problems: many smart thermostats switch the radio off when batteries or borrowed power run low. Read the brand's code first.

5 steps ~30 mineasy

More Google Nest thermostat codes

Google Nest · Thermostat

C wire required

Single source

Google Nest · Thermostat

E2 / E22 / E72 / E402

No power wire detected

Single source

Google Nest · Thermostat

E3 / E23

No power on the Rc wire

Single source High-voltage / caution

Google Nest · Thermostat

No power on the Rh wire

Cross-checked High-voltage / caution

Google Nest · Thermostat

E5 / E25 / E75 / E155 / E255 / E405

No heating or cooling wire detected

Single source

Google Nest · Thermostat

Too many wires

Single source