Frigidaire · Dehumidifier error code

EC / F0Sealed system failure

Cross-checked Licensed pro only

Unlock what this code means, its causes, tests and parts

Full library + AI assistant for $34.90, one time.

Stop: this involves gas or the sealed refrigerant system.

OnCall Tech only describes the symptom. Gas work needs a licensed gas technician, and refrigerant work requires EPA Section 608 certification. If you smell gas: shut off the supply if it is safe, do not switch anything on or off, ventilate, leave the building and call the gas utility.

OnCall Tech is a reference tool for trained technicians and can make mistakes. Always disconnect power and confirm with the manufacturer's documentation before you work.

Related diagnostic guides

Guide · Dehumidifier

Dehumidifier runs but collects little or no water

Rule out the easy causes first: setpoint already reached, room too cool, dirty filter, blocked airflow, or water going down a hose. Then confirm the compressor actually runs and the coil gets cold. A compressor that runs with a warm coil is a sealed-system failure: refer, do not repair.

6 steps ~45 minmoderate

Guide · Dehumidifier

Dehumidifier coils frosting or icing up

Light frost that comes and goes is normal: the defrost logic stops the compressor and runs the fan until it clears. Persistent ice means the room is too cold, airflow is restricted, the coil sensor has failed, or the refrigerant charge is low (sealed system, blocked).

6 steps ~40 minmoderate

More Frigidaire dehumidifier codes

Frigidaire · Dehumidifier

AS / ES / F1 / F2 / L1 / F5

Temperature or humidity sensor fault

Cross-checked

Frigidaire · Dehumidifier

E4 / C5

Electronic control failure

Cross-checked

Frigidaire · Dehumidifier

H3 / E5

Compressor overload protection

Cross-checked

Frigidaire · Dehumidifier

Pump-out failure

Cross-checked